A rear dormer loft conversion is the most popular type across Hampshire — it gives you maximum headroom and floor space by extending the back of the roof outwards with a flat-roofed or pitched-roof box. We build dormers regularly and know how to detail them properly so they don't leak, they look right from outside, and they provide the space you need inside.
Loft conversions come in several types, and the right choice depends on your property style, budget, and how much space you need. A Velux or roof light conversion is the simplest — roof windows are installed into the existing roof slope without changing its shape. This is cheapest but gives limited headroom. A rear dormer extends the back roof slope outwards with a box structure (flat-roofed or pitched), creating a vertical rear wall with full standing headroom. A hip-to-gable extends one or both side walls up from hip to gable, squaring off the roof and gaining extra width. A mansard replaces the rear roof slope with a nearly vertical wall and flat top, giving maximum space. An L-shaped dormer extends across the back and into a rear return, suitable for Victorian terraces. Our role covers everything from the ridge line down: structural alterations to the existing roof timbers (cutting and supporting rafters, installing steel beams, building new gable walls), dormer construction (steelwork, timber frame, cladding, flat or pitched roof covering), re-tiling disturbed areas, Velux or skylight installation, all flashings and weatherproofing, insulation, and connections to the existing roof structure. For properties in Farnborough, where a town in north-east Hampshire known for its aviation heritage, with a range of Victorian properties, 1960s estates, and contemporary developments, we assess the existing roof structure and advise which conversion type is practical and cost-effective. Permitted Development rights allow most loft conversions without planning permission, but there are limits: 40 cubic metres for terraced houses, 50 cubic metres for detached and semi-detached, and the dormer can't extend above the existing ridge line or forward of the principal elevation.
The flat roof on top of a dormer is a common leak point, especially if it was originally covered in felt or if the junction with the main roof wasn't properly flashed. We build dormer roofs with EPDM rubber or GRP fibreglass — modern systems that last decades. The critical detail is the back gutter where the dormer roof meets the existing tiled slope above — this needs careful lead or GRP work to prevent water pooling and leaking through.
A loft conversion changes the thermal dynamics of your roof — what was a cold, ventilated loft becomes a heated living space. If the insulation isn't installed correctly between and over the rafters, cold spots develop where warm moist air meets cold surfaces, leading to condensation and potentially mould. We insulate between the rafters with rigid PIR boards and ensure a continuous vapour barrier.
Where a dormer or gable extension meets the existing roof, the detail work is critical. Tiles need to be carefully cut and re-laid, flashings need to integrate old and new roof surfaces, and the structure needs to transfer loads properly. Poor junction details are the most common cause of leaks and structural issues in loft conversions — and they're the hardest to fix afterwards.
Converting a loft usually means cutting existing rafters and purlins to create the new space. The loads these timbers were carrying need to go somewhere — typically into steel beams (RSJs) supported by the load-bearing walls. Skipping proper structural calculations or undersizing the steels is dangerous and illegal. We work from engineer-approved structural drawings on every conversion.
Loft conversion costs in Farnborough vary significantly by type. A Velux-only conversion (roof windows, insulation, staircase, and basic fit-out) starts from £20,000-£30,000. A rear dormer conversion — the most popular — runs £35,000-£50,000. A hip-to-gable with rear dormer costs £45,000-£65,000. An L-shaped dormer on a Victorian terrace is typically £50,000-£70,000+. A full mansard conversion is the most expensive at £55,000-£75,000+. These are total project costs including structure, roofing, staircase, insulation, electrics, plastering, and basic finishing. The roofing element — which is our scope — typically represents 30-40% of the total cost. A well-executed loft conversion typically adds 15-20% to your property value, often making it the best return-on-investment home improvement you can do.
Structural steels: RSJs sized per structural engineer's specification, typically S275 grade. Dormer framing: C24 graded structural timber for studs, head plates, and cripple rafters. Dormer roof covering: Firestone EPDM rubber (flat roof) or tiles/slate to match existing (pitched dormer). Dormer cheeks: typically clad in tile hanging, lead, zinc, or uPVC. Main roof re-tiling: matching tiles to existing, with new Tyvek Supro breathable membrane and treated battens where disturbed. Insulation: Celotex or Kingspan PIR boards (100-120mm between rafters, 50mm over rafters for continuous insulation layer). Skylights: Velux GPU or GGL as specified. Lead flashings: code 4 and 5 milled lead for all junctions.
We visit your Farnborough property, measure the loft space, check the existing roof structure, and advise which type of conversion is practical. We assess head height, ridge height, roof pitch, and the position of chimney stacks, soil pipes, and other obstacles.
Working with a structural engineer, we produce drawings showing the proposed conversion. If planning permission is needed (conservation area, exceeding PD limits), we advise on the application. Building Regulations approval is arranged for the structural and thermal elements.
Steel beams are installed to carry the loads from cut rafters and purlins. The existing roof structure is modified to create the new space — this is the most technically demanding phase and needs to be done precisely per the engineer's specification.
The dormer frame is built out from the existing roof, clad, and weatherproofed. The dormer roof is covered with EPDM or GRP. All junctions with the existing roof are flashed and tiled. Velux windows are installed where specified. The whole envelope is insulated and vapour-sealed.
Once the roof structure is complete, watertight, and insulated, we hand over to the interior fit-out team (yours or ours) for staircase, electrics, plastering, bathroom, and finishing. We remain available throughout to deal with any roofing queries or snagging.
Loft conversions are hugely popular across Farnborough as property prices make moving increasingly expensive. Farnborough is a town in north-east Hampshire known for its aviation heritage, with a range of Victorian properties, 1960s estates, and contemporary developments. The type of conversion that works best depends on the existing roof shape — hipped roofs (common on 1930s-50s semis) benefit from hip-to-gable plus rear dormer; Victorian terraces suit L-shaped dormers; and properties with good existing head height can sometimes get away with a Velux-only conversion. Permitted Development rights apply to most residential properties in Hampshire, but conservation areas and Article 4 directions can restrict dormer size, position, and materials. We check planning requirements before quoting so there are no surprises.
We focus on what we're best at — the structural roof alterations, dormer construction, and weatherproofing. This is the most critical phase of any loft conversion, and getting it right means no leaks, no cold spots, and a structure that's built to last.
We build dormers that don't leak. The back gutter detail, the cheek flashings, the flat roof system — every junction is detailed properly with quality materials. We've built dormers across Hampshire on every property type.
We understand the Part L, Part B, and structural requirements for loft conversions. We work from engineer-approved drawings and liaise with Building Control on the roofing aspects.
We know the Permitted Development rules and the conservation area restrictions across Hampshire. We'll tell you upfront whether your project needs planning permission and what constraints apply.
Velux-only: £20,000-£30,000. Rear dormer: £35,000-£50,000. Hip-to-gable plus rear dormer: £45,000-£65,000. L-shaped dormer: £50,000-£70,000+. Mansard: £55,000-£75,000+. These are total project costs. The roofing and structural element is typically 30-40% of the total. We provide detailed quotes for our scope of work after the feasibility assessment.
Most loft conversions fall under Permitted Development and don't need planning permission, provided you stay within the volume limits (40m³ terraced, 50m³ detached/semi), don't extend above the existing ridge, set the dormer back at least 20cm from the eaves, and don't extend forward of the principal elevation. Conservation areas and listed buildings have additional restrictions. We check all of this before quoting.
The roofing and structural phase typically takes 2-4 weeks depending on complexity. The full project — from scaffolding up to move-in ready — is usually 8-12 weeks. A Velux-only conversion is quicker; an L-shaped or mansard is longer. Weather can affect the roofing phase, so we build contingency into the programme.
Yes — typically 15-20% of the property value, which in Farnborough almost always exceeds the cost of the conversion. A well-done loft conversion effectively adds an extra bedroom (or bedroom and bathroom), which moves the property into a higher price bracket. It's consistently rated as the best return-on-investment home improvement.
It depends on your property. Semi-detached with a hipped roof? Hip-to-gable plus rear dormer gives maximum space. Victorian terrace? L-shaped dormer. Good head height already? Velux-only is cheapest. Limited budget? A rear dormer is the best balance of space and cost. We'll assess your specific property and recommend the option that gives you the most for your money.
If you're semi-detached or terraced and the loft conversion involves work on or near the party wall (which it usually does), you'll need to serve a Party Wall Notice on your neighbour under the Party Wall Act 1996. This is a legal requirement. Most neighbours consent without issues, but it needs to be done formally. We can advise on the process and timing.
The staircase is part of the interior fit-out rather than the roofing work, but it's a key planning consideration. Building Regs require a fixed staircase (not a ladder or spiral in most cases) with a minimum headroom of 2m. The usual position is above the existing staircase, rising from the landing. We factor in the staircase opening when designing the structural alterations to the roof.
Get in touch for a free, no-obligation quote. We respond within 24 hours.
Get Your Free Quote WhatsApp Us